+86-15875553143
Adhesive Tape Materials And Whole Set Solutions
PE Foam Tape

BF 2000

  • Rogers BISCO BF-2000 Ultra Soft flame retardant foam offers the perfect balance of low weight and softness for transportation, industrial, and electronics applications.
  • BISCO BF-2000 Ultra Soft is a highly compressible silicone foam with the right combination of low weight and softness for applications requiring low closure force and dust sealing.
  • BF-2000 silicone's ultra-low softness allows designers to use less force to seal enclosures while still protecting devices from the environment.
  • This material is ideal for vibration isolation in electronic components and transportation vehicles.
  • BF-2000 foam is also ideal for low closure force gaskets within portable electronics such as laptops and LCD screens within aircraft and rail interiors.

BF 2000 Technical Data Sheet (TDS)

PROPERTYTEST METHODTYPICAL VALUE*
ColorVisualBlack
Thickness, mm (inches)Internal3.18 - 12.70
(0.125 - 0.500)
Density, kg/m³ (lb./ft³)Internal175
(11)
Compression Force Deflection, kPa (psi)ASTM D105610 (1.5)
Compression Set, %ASTM D1056 100°C (212°F) / 22 hrs / 50%6.9
Water Absorption, %Internal
2" below water surface / 24 hrs /
change in weight
1.4
Temperature Range, °C (°F)Internal-55 to +200
(-67 to +392)
Thermal Conductivity, W/m °K ASTM D5180.048
Low Temperature FlexASTM D1056
-55°C (-67°F) / 5 hrs
Pass
Low Temperature BrittlenessASTM D746
-55°C (-67°F) / 3 min
Pass
NOMINAL THICKNESSTOLERANCE
mm (inches)mm (inches)
3.18
(0.125)
± 0.762
(± 0.030)
4.78
(0.188)
± 0.762
(± 0.030)
6.35
(0.250)
± 1.016
(± 0.040)
9.53
(0.375)
± 1.524
(± 0.060)
12.70
(0.500)
± 1.524
(± 0.060)

BF 2000 Features

  • Available in thicknesses from 0.125 to 0.500 in.
  • The typical density of 10 PCF
  • Excellent memory and low-stress relaxation
  • Resistant to UV, ozone, extreme temperatures, and flame
  • Available with pressure-sensitive adhesive on one or two sides, allowing easy surface application
  • CFD range of 2.5 PSI max
  • The ultra-low softness allows protective seals that use less force
  • High compressibility enables the material to conform to variable width gaps, allowing greater design flexibility
  • Reduces maintenance costs associated with gasket failures due to compression set and softening

BF 2000 Application

LCD Gaskets

  1. Rogers offers a portfolio of thin, soft LCD Gasket solutions to seal and protect displays in TVs, monitors, tablets, and laptops.

  2. Liquid Crystal Displays (LCDs) in display systems including large-screen televisions, computer monitors, laptops mobile phones, and other portable devices require protection and the long-term performance of these are important and delicate LCDs.

  3. Display LCDs require cushioning, sealing, spacers, and grips to seal out dust and particulate matter, manage damaging impact energy to sensitive components, and keep the glass in place.

Cold supply chain

  • High-performing, diverse material solutions for various elements of the cold supply chain.
  • Rogers offers a broad range of materials that preserve and protect sensitive products at a multitude of temperature levels throughout the cold storage supply chain.
  • Rogers materials perform exceptionally well at standard equipment temperatures, from refrigerated (2° C to 8°C) to the freezer (-10°C to -25°C), to the ultra-low freezer (-70°C to -90°C), to liquid- or vapor-phase nitrogen (-135°C to -196°C) with no compromise of mechanical properties.

Gap filling

  1. Filling gaps due to manufacturing or environmental variances require flexible materials that maintain the consistent force for a reliable seal.

  2. Across a wide variety of applications, both PORON® Urethane and BISCO® Silicone foams offer the Compression Set Resistance (C-set) to maintain reliable pressure force to fill and seal gaps consistently, withstanding collapse caused by the stresses of compression and temperature over time.

  3. These superior gap filler foams are flexible yet reliable, offering long-term durability to fill gaps caused by variations in manufacturing tolerances or environmental changes that may occur in a broad range of operating conditions.

Shock Absorption

  1. Protection for consumers and devices.
  2. When a device, a system, or even the human body is subjected to mechanical shocks such as a drop or a bump, the result can be fractures, mechanical failure, or personal injury.
  3. Protection in the area of shock absorption can be achieved via the use of high-performance, lightweight materials to isolate impact and damp vibration.
  4. PORON® polyurethane and BISCO® silicone materials continue to prove to be the best shock absorbing materials when flexible cushioning is needed.
    Both have a unique open cell structure that provides excellent resistance to compression set (collapse) and delivers superior shock absorption, impact protection, high resiliency, and vibration damping.
  5. Rogers’ broad portfolio of shock-absorbing foams offers an array of solutions developed specifically for protecting components in industrial, electronic, and transportation applications, and protecting consumers in medical, footwear, and other wearable applications.

Gasketing & Sealing

  • Reliable gaskets and seals must withstand challenging conditions and industry standards.
  • For successful sealing in enclosure and gasket design, material selection is critical.
  • A gasket’s primary task is to protect components and prevent failures and unplanned maintenance.
  • Compressibility, environmental exposure, sealing effectiveness, and specifications should be considered when selecting a material for gasket seal design.
  • Effective sealing and gasketing materials must be able to withstand the effects of compression, manage damaging impact energy and seal out dust and particulate matter.
  • Rogers offers a portfolio of high-performance sealing and gasketing solutions that are highly compressible and conformable while resisting compression and stress relaxation.
  • These unique materials effectively seal out dust, water, and other contaminants for the life of the product.

Vibration Management

  1. Rogers offers a broad portfolio of options for vibration isolation, vibration damping, and noise abatement.
    Vibration management is a key factor in the design of products for transportation, consumer goods, and industrial markets.

  2. Vibration can be both a source of annoying noise and the cause of damage to delicate components.
    Rogers’ Elastomeric Material Solutions are proven to address noise and vibration for critical applications.
    PORON® Polyurethane (including PORON® VXT™ Vibration Isolation materials) and BISCO® Silicone foams are highly resilient elastomers ideal for use as vibration isolators.

  3. These unique materials provide excellent resistance to compression set (collapse), and exhibit high resiliency, good vibration damping, and impact absorption.

  4. The foams can deflect vibrations over long periods of time while experiencing only minimal changes in stiffness due to stress relaxation.

  5. Their stability in a wide range of environments makes than ideal candidates for vibration isolators in a wide range of applications.

  6. In addition, ARLON Self-Fusing Silicone Tapes bond irreversibly to dampen vibration while providing an insulative barrier that is resistant to moisture.

Related Silicone Foams

BF 1000

BISCO BF-1000 Extra Soft Cellular Silicone is a highly flame-resistant material, ideal for sealing outdoor enclosures, protecting electronics from shock and heat, and providing cushioning and vibration isolation.

Read More
BF 2000

Rogers BISCO BF-2000 Ultra Soft flame retardant foam offers the perfect balance of low weight and softness for transportation, industrial, and electronics applications.

Read More
HT 800

BISCO HT-800 Medium Cellular Silicone is a versatile, medium firmness silicone.

Read More
HT 820

Rogers BISCO HT-820 Firm Cellular Silicone provides enhanced durability and sealing in a wide range of environmental conditions and applications.

Read More
HT 840

BISCO® HT-840 Extra Firm Silicone Foam

Read More
HT 870

Rogers BISCO HT-870 Soft Cellular Silicone is a firmer, denser version of our HT-870 Silicone and offers the ability to seal and cushion within a wide range of applications.

Read More

Get Quotation Or Free Samples

Sales - Mrs Lulu Liu
Sales - Mr Will Wong
Sales - Miss Tracy Xia
Sales - Mr Jason Wang

    NO.57  Houting Second Industry Area Shajing Baoan Shenzhen China 518104
    +86-15875553143
    apartmentenvelopephone-handset linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram