+86-755-2301-3143
Adhesive Tape Materials And Whole Set Solutions
Adhtapes Tiktok

3M 875

3M 875

3M 875 has a polyester film backing with a green, rubber-based adhesive. It can be used in high-temperature applications including temporary holding and masking in composite bonding. When the job is finished, removal is simple, and this tape offers clean release after autoclave processes where the tape is used for holding TC wires, vacuum bagging materials, and tooling. The high temperature resistant, non-silicone adhesive also makes it ideal for paint masking in liquid or powder coat processes.

3M 875 has a high temperature operating range while offering clean removal from stainless steel, aluminum, and glass after exposure up to 350°F (177°C) for several hours. In shorter cycles, the tape provides satisfactory performance up to 400°F (204°C) bake cycles. Additionally, the rubber-based adhesive can be used on many parts where subsequent painting or bonding is necessary.

They can be used in high-temperature applications including temporary holding, masking, and flash breaker with clean release during Autoclave Processes (hold TC wires, vacuum bagging materials, and tooling).

High-temperature resistant, non-silicone adhesive makes it ideal for paint masking in liquid or powder coat processes.

Data Sheet
Features
Applications
Our Services

3M 875 Data Sheet

3MPolyester Tape 875 & 876 Green
Product Construction
BackingAdhesiveColor
PolyesterRubberGreen
Typical Physical perties
ASTM Test Method
3M™ Polyester Tape 875 Green
Adhesion to Steel:36 oz./in. width (37 N/100 mm)D-3330
Tensile Strength:34 Ibs./in. width (590 N/100 mm)D-3759
Elongation at Break:1.05D-3759
Back ing Thickness:0.99 mils (0.025 mm)D-3652
Total Thickness:2.0 mils (0.052 mm)D-3652
Temperature Use Range:60 - 400°F (140 - 204°C) withstands autoclave cycles 叩 to 35O°F (177°C)
3M™ Polyester Tape 876 Green
Adhesion to Steel:33 oz./in. width (36 N/l()0 mm)D-3330
Tensile Strength:66 Ibs./in. width (1160 N/100 mm)D-3759
Elongation at Break:1.28D-3759
Backing Thickness:2.0 mils (0.051 mm)D-3652
Total Thickness:3.1 mils (0.078 mm)D-3652
Temperature Use Range:60 - 400°F (140 - 204°C) withstands autoclave cycles up to 35O°F (I77°C)
Remarks: The above technical information and data should be considered representative or typical only and should not be used for specification purposes.

3M 875 Features

  • The thin, high-strength polyester film provides a degree of conformability while meeting low caliper requirements.
  • High-temperature resistance provides good initial tack and holding strength with clean removability.
  • Non-silicone, the rubber-based adhesive allows use on many parts where subsequent painting or bonding is necessary.
  • High temperature – clean removal from stainless steel, aluminum, and glass after exposure up to 350°F (177°C) for several hours. In shorter cycles, the tape can be expected to provide satisfactory performance in 400°F (204°C) bake cycles.
  • High-temperature resistance provides good initial tack, holding strength, and clean removability
  • Works in demanding conditions including autoclave cycles up to 350°F (177°C)
  • Provides a degree of conformability while meeting low caliper requirements
  • Rubber adhesive can be used on many parts where subsequent painting or bonding is necessary
  • Green color for easy identification and positioning
  • 3M 875 has a thin, high-strength polyester film that provides a degree of conformability while meeting low caliper requirements. This tape works in demanding conditions and provides satisfactory performance in short-term bake cycles at 400°F (204°C), as well as longer-term autoclave processes up to 350°F (177°C).

3M 875 Applications

  • Masking parts for high-temperature painting and powder coat paint.
  • Holding materials or sealing vacuum bags during autoclave processing
  • Temporary holding
  • Masking parts for high-temperature painting and powder coat paint.
  • Masking edges of overlap seams in metal bonding process where excess adhesive flows onto tape. Minimizes clean-up on tape removal.
  • Holding materials or sealing vacuum bags during autoclave processing.
  • Cutting or slitting to the length and width required by the customers
  • Laminate liner or other materials
  • Die cut according to customer's drawing

Get In Touch

Contact us get the quote or free samples
+86-755-2301-3143
+86-158-7555-3143

Location

NO.57 Houting Second Industry Area Shajing Baoan Shenzhen China 518104
Sales - Mrs Lulu
Sales - Mr Tom
Sales - Miss Sasa
Sales - Mr Jason

Contact Adhtapes Ltd Now

    Copyright © 2023 Adhtapes | All Rights Reserved

    linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram