3M 5490

3M 5490 uses an extruded polytetrafluoroethylene (PTFE) film backing.
This tape offers an extremely low coefficient of friction which, in combination with a pressure-sensitive silicone adhesive, creates a smooth, non-stick surface over a variety of substrates to assist in the movement of materials in many types of lay-flat applications.

Brand: 3M
Model Number: 5490
Backing: Extruded PTFE
Adhesive: Silicone
Color: Brown
Standard roll length: 32.9m / 36 yds
Thickness: 0.09 mm
Die-cutting: Any shape and any size

Data Sheet

Features

Applications

Our Services

3M 5490 Data Sheet

3M5490 TDS
Adhesion to Steel:	27 oz./in. width (30 N/100 mm)	D-3330
Tensile Strength at Break:	17 lbs./in. width (304 N/100 mm)	D-3759
Elongation at Break:	170%	D-3759
Backing Thickness:	2.0 mils (0.05 mm)	D-3652
Total Tape Thickness:	3.7 mils (0.09 mm)	D-3652
Temperature Use Range:	-65° to 500°F (-54° to 260°C)

3M 5490 Features

Non-stick PTFE film provides an exceptionally slick surface for easy clean-up
Silicone adhesive provides clean removal from a variety of surfaces
Wide temperature range for performance on heated machinery and equipment
Thicker version of 3M™ PTFE Film Tape 5490, providing more durability and longer wear
Extruded 3M™ PTFE Film Tape lies flatter than typical skived PTFE film tapes
Excellent chemical resistance enables the tape to withstand challenging applications
High strength and abrasion resistance ensure reliability and performance to reduce friction, rattle, and machinery noise
Extruded PTFE film tapes lie flattered than typical skived PTFE film tapes, resist curling during unwinding and provide an exceptionally smooth surface when applied.
Extruded, calendered film tapes resist curling during unwinding and provide an exceptionally smooth surface when applied.
Extruded PTFE film tapes lie flattered than typical skived PTFE film tapes.
Provides excellent chemical resistance except to organic solvents.

3M 5490 Applications

Roll-wrap for web processing, belts, and plates where sticky materials and inks may occur
High-temperature wire bundling and harnessing
Squeak and noise reduction
The lining of chutes, troughs, and ducts
Shielding and protecting against chemicals
Mold release for composite bonding
The easy-release surface on rollers, plates, belts, etc. where a build-up of sticky materials and inks can occur.
Low coefficient of friction surface on rollers, formers, etc. to facilitate web movement.
Chemical-resistant surface for sealing and masking.
Wrapping rubber nip rollers on hot polyethylene extrusion machines.